to the top
Home | Products | Flexible installation | myGEKKO RIO Print this page

myGEKKO RIO

In the installation of myGEKKO Rio-modules or similar devices, there is a separation between the areas “Field” and “Distributor”.

Field: the unintelligent sensors and actuators are integrated in the control concept in a simple, cheap but at the same time flexible way. It is possible to use actuators and sensor such as push-buttons, temperature sensors, light sensors etc. of different brands and designs. Therefore, the customer has the possibility to choose push-buttons and sensors without having to worry about communication standards, protocols or future developments.

Distributor: thanks to the use of unintelligent sensors and actuators, the whole intelligence of the systems is situated in the distributor. In case of service, the job can be carried out from a central point. Modules are offered by a lot of manufacturers, like Wago, Phönix, Beckhoff, myGEKKO Rio etc.

myGEKKO Rio Module:
The myGEKKO Rio modules have been specifically developed for the building automation and offer the optimal prerequisites for installers, planners and builders:
> Only 2 types for every solution
> Optimal connection and design for the installation of the distributor,
> ideal display and operation for the final customer.
> Quick installation and simple wiring


  • > myGEKKO RIO-29 – a true multitask device

    From analog and digital IOs up to several interfaces like M-Bus, RS232, RS485: everything you need is already integrated in the RIO-29 module.

    Technical details

    • Digital inputs: 8 inputs, 24VDC electrically isolated, status display and label field
    • Digital outputs: 8 outputs, 24VDC 500 mA with status display and label field
    • Analogue inputs: 8 inputs 0-10V, 0-20 mA, PT1000
    • Analogue outputs: 2 outputs, 0-10V 0-20 mA
    • Interfaces: 1 additional interface RS485 1 additional interface RS485/RS232 1 MBUS interface for 3 devices
    • Switching: auto/manual switching with status display
    • Protection: Odd-/Even Lock safety function
    • Features: function LED On/Off – function as bus coupler – address selection switch
  • > myGEKKO RIO-16 - the compact power module

    Home utilities are switched through 8 digital inputs with 230 VAC 16A (which allows doing without additional relays!). Moreover, sensors like push-buttons or motion detectors can also be connected to the integrated digital inputs.

    Technical details

    • Digital inputs: 8 inputs, 24VDC electrically isolated, status display and label field
    • Digital outputs: 8 outputs, 230VAC 16 A with status display and label field
    • Switching: auto/manual switching with status display
    • Protection: Odd-/Even Lock safety function
    • Features: function LED On/Off –address selection switch
1 POST:1870